Hey,
Pretty new here but have learned a shit load of you all, dont have much to offer but took a couple of photos of a mates bass pedal that i just fixed for him, its a di/preamp/fuzz thing.
Anyway hope this helps
Aguilar - Tone Hammer
-
Jarno
- Resistor Ronker
Information
- Posts: 345
- Joined: 12 Nov 2008, 10:18
- my favorite amplifier: Something nice
- Completed builds: Alembic-like state-variable and sallen-key filter preamps
Lovepedal Eternity
Phase 100
Brown source
Fuzz Face
Flipster
Alembic F2B (tube preamp)
Opamp and FET buffers
Loads of speakercabinets and ampracks
Busy building a modular synth (ssm2044 vcfs, preamps, ADSR's, VCO's, VCA's)
Tables
Bookshelves
Basses
So many things! :D - Location: Rosmalen, NL
- Has thanked: 27 times
- Been thanked: 75 times
Fascinating goopage 
A few opamps can be seen though, so, at least a dual for the balanced output, one for the input, maybe one for the output.
So then, tone controls and distortion under the goop? It looks as if there's plenty of room to do things with discrete transistors, or maybe multi band distortion?
Interested to see the schematic of one of these.
A few opamps can be seen though, so, at least a dual for the balanced output, one for the input, maybe one for the output.
So then, tone controls and distortion under the goop? It looks as if there's plenty of room to do things with discrete transistors, or maybe multi band distortion?
Interested to see the schematic of one of these.
"It crackles....., but that's ok"