Page 1 of 1
Fulltone RTO schematic [traced]
Posted: 15 Jan 2017, 11:31
by apollomusicservice
Another one overpriced pedal, looks like many other with minor changes in diode clipping stage. Somewhere I read it's optimised for .012 strings! LOL
Re: Fulltone RTO schematic
Posted: 15 Jan 2017, 14:17
by Dirk_Hendrik
One knows a modified tubescreamer when one sees one!

Re: Fulltone RTO schematic
Posted: 15 Jan 2017, 14:37
by okgb
I thought he said something like leaving the first buffer out made it more " interactive " or responsive
To the gtr volume control or something like that.
Curious combo of clipping diodes, one of everything for good measure?
Re: Fulltone RTO schematic
Posted: 15 Jan 2017, 18:44
by Dirk_Hendrik
Doubt it.
When you use GE's in the feedbackloop there's little level left and cliping kicks in way too soon. Lifting the GE with a SI diode will give you the clipping characteristic of a GE diode but lifted with the forward drop voltage of an SI diode. In this case the shottkey will be somewhat lower than the normal SI resulting is assymetrical clipping with a GE characteristic.
Re: Fulltone RTO schematic
Posted: 24 Feb 2017, 14:45
by okgb
That sounds like something done with thought,
I would guess all his employee's tell him he has golden ears, but I like some of the ft stuff, own some myself
His latest booster with " big " germanium diodes and more sanded I.C.'s seems as much an attempt to attain
" Klone Mystique status " [ KMS ] it's an interesting addition to the booster collection, not a bad price when bought with the o/d combo but
I bet it burns him that he doesn't have that kind of legend of the Klone,