Component identification help needed

Forum dedicated to helping people debug and troubleshoot non-functional pedals or builds. Please use an clear and informative title, indicating circuit and basic problem. Don't forget to mark the issue as fixed if this is the case.
Post Reply
User avatar
99.5
Information
Posts: 2
Joined: 06 Apr 2010, 02:44
Has thanked: 4 times

Post by 99.5 »

Hi everyone
I´m trying to repair a 4 band equalizer from my nylon guitar and cant recognize the component that shows in the attachement.
Any idea?
Thanks in advance
Top
User avatar
mictester
Old Solderhand
Information
Posts: 2915
Joined: 11 Sep 2008, 20:29
my favorite amplifier: Mesa Boogie, Roost Sessionmaster, AC30
Completed builds: Hundreds! Mostly originals, a few clones and lots of modifications.
Location: Somewhat closer to Amsterdam than before!
Has thanked: 32 times
Been thanked: 825 times
Contact:
Contact mictester

Post by mictester »

According to my Surface Mount component database, a 5-terminal device with CA on the top can be a 4V Low-Drop-out Regulator, a µPA503T dual-gate FET, a 2-input CMOS NAND gate or a 2V Voltage Detector. Take your pick!
"Why is it humming?" "Because it doesn't know the words!"
Top
User avatar
99.5
Information
Posts: 2
Joined: 06 Apr 2010, 02:44
Has thanked: 4 times

Post by 99.5 »

Thanks so much mictester !!!
Top
Post Reply

Return to “Pedal Debugging & Troubleshooting Support”