Hello,
I've just "finished" my build of the Black Arts Revelation Super Bass Debugging clone based on this layout :
http://tagboardeffects.blogspot.fr/2017 ... super.html
And 2 strange things occur :
1) Potentiometer seems to have effect only on the last quarter.
I've checked values and i have the same as the layout indicate (100k A x2, 500k A)
2) when i turn the effect on, the “gain” is not immediately as the good value, i can here like a “swelling gain”.
After ~1sec it’s ok.
Just for information I have not found an y 6k resistor so I replaced them by 6k2.
Thank you for your help
Thomas
Black Arts Revelation Super Bass Debugging
-
bmxguitarsbmx
- Cap Cooler
I don't see a schematic. I must be missing something. Hard to say without one.
Information
- Posts: 49
- Joined: 10 Nov 2013, 08:01
- my favorite amplifier: Ampeg
- Completed builds: Veroboards builds:
Throbak Overdrive Boost
Wampler Ecstasy
Creepy Fingers Doomidrive
Black Arts Quantum Mystic
Roger Mayer Voodoo Bass
Idiot box Blowerbox
Hudson Sidecar
Pcb builds:
Fulltone 69 (GGG kit)
Russian Big Muff (Musikding kit)
EHX Bassballs (home etched using Topopiccione layout)
BJFE BBOD (home etched, thx FSB)
Triangle Muff (Guitar PCB board)
Deluxe Bass Fuzz (home etched,gausmarkov.net layout)
Clone Theory Chorus (Celeste pcb from lectric-fx)
Cornish G2 (home etch, layout thx FSB)
Shin-Ei FY-2 Ge version (home etched, own layout)
Klon (Aion Refractor pcb)
Mutron Phasor II (home etched, layout thx JohnK)
Sunny-T (pcb by guitar pcb)
Rocket Overdrive (pcb by Pepers' pedals)
Sonomatic Deluxe Tape Delay (pcb by Skidmark)
Black Arts Quantum Mystic (adapted storyboardist layout) - Location: Lausanne, Switzerland
- Has thanked: 36 times
- Been thanked: 110 times
Sorry to resurrect an old thread. I just stumbled on it,
I happened to have a Revelation Superbass and I traced it back then.
It's based on a stripped Big Muff,
I happened to have a Revelation Superbass and I traced it back then.
It's based on a stripped Big Muff,
- Revelation Superbass_original pcb layout