freestompboxes.org

hi everyone!
this is my first post on this forum.
i wanted to share with you this layout that I had in the drawer for a long time and completed a few days ago. the scheme that I followed is the one taken from madbean "current lover" (except some changes). it can mount both the mn3007 and the mn3207 by positioning the bridges under the pcb. I did not have time to make it happen ... but I will do it soon.

who wants can download the project file here ...




hope it works

I'm sorry for my english

verified witn mn3207





change c18=47pf.... r27=39k

First of all, that's a nice layout! I have a 3007 somewhere, and I thought on building a flanger with it, so maybe I'll use your layout. Thanks a lot for making it public!

That said, you've posted it at the wrong session of the forum. This is just to discuss the Klon projects. Your layout belongs to the modern stompboxes session (viewforum.php?f=1). Don't worry, things like this happens all the time

thanks for the information! as soon as possible I will publish the layout of the KLON ... now I know where to publish exactly

I drew up a perfboard layout based on the PCB above. I didn't label all the parts but it follows the PCB so it shouldn't be hard to figure out.

I need vero board layout , because its so easy to build, if anyone have this please share it.

Ali7887 wrote: ↑06 Mar 2023, 16:57 I need vero board layout , because its so easy to build, if anyone have this please share it.

If it's so easy, why not give it a try yourself?

Lani wrote: ↑09 Mar 2023, 09:17

Ali7887 wrote: ↑06 Mar 2023, 16:57 I need vero board layout , because its so easy to build, if anyone have this please share it.

If it's so easy, why not give it a try yourself?

I mean it is so easy to "build a pedal" from layout, therefore i need layout.

Anyone has veroboard or altium software project of this circuit?