Ibanez WH10 V2 volume control

Forum dedicated to helping people debug and troubleshoot non-functional pedals or builds. Please use an clear and informative title, indicating circuit and basic problem. Don't forget to marked the issue as fixed if this is the case.
Post Reply
josh_b_b
Posts: 2
Joined: 05 Feb 2019, 20:19

Post by josh_b_b »

HI, I seem to have lost my login as it's been a few years, so I am new and shiny

I was searching the threads and found some info on how to make the reissue of the Ibanez WH10 sound more like the original (cap removal) and about true bypassing, BUT i can't find anywhere any good information on how to add a volume control to reign in the gain boost you get on these pedals. I know people do it but for some reason to my knowledge no one has ever posted how best to do it. So if anyone could advise that would be super duper

thanks
(schematic attached drawn by Dirk)
Attachments
WH10 V2 Schematic
WH10 V2 Schematic

User avatar
gurishka
Breadboard Brother
Posts: 87
Joined: 22 Oct 2008, 03:34
Location: Victoria, Australia
Has thanked: 13 times
Been thanked: 1 time

Post by gurishka »

Sorry to revive an old thread.

But by looking at the schematic (and I'll be attemping this on one of these soon), on the LM358, R11 may be a way of taming the volume issue.

I'll have to do the mod and report back.

josh_b_b
Posts: 2
Joined: 05 Feb 2019, 20:19

Post by josh_b_b »

I ended up just adding a volume control. I think i made another thread about that

Post Reply