FAME DS-10 Distortion traced  [schematic]

All about modern commercial stompbox circuits from Electro Harmonix over MXR, Boss and Ibanez into the nineties.
Post Reply
Manfred
Transistor Tuner
Information
Posts: 1137
Joined: 04 Apr 2009, 23:42
Has thanked: 1104 times
Been thanked: 712 times

Post by Manfred »

IMO a good sounding mild distortion, realized with a small number of components.
Here are the results of the tracing:
FAME DS-10 Top.jpg
FAME DS-10 PCB Component Side.jpg
FAME DS-10 PCB Solder Side.jpg
FameSlasherLayout.JPG
FAME DS-10 slasher schematic.JPG
ClippingDiodesFameSlasher.jpg

287m
Breadboard Brother
Information
Posts: 115
Joined: 11 Nov 2014, 22:51
Location: Heaven ~ Hell
Has thanked: 352 times
Been thanked: 62 times

Post by 287m »

308!

good candidate for A and LB.

thanks Manfred

Manfred
Transistor Tuner
Information
Posts: 1137
Joined: 04 Apr 2009, 23:42
Has thanked: 1104 times
Been thanked: 712 times

Post by Manfred »

I made a vero layout for a real bypass, leaving out the components for the millenium bypass and adding a series resistor for the LED.
FAME-DS10_VeroComponentSide.jpg
FAME-DS10_VeroSolderSide.jpg
FAME-DS10_VeroComponentSide.pdf
(185.35 KiB) Downloaded 15 times
FAME-DS10_VeroSolderSide.pdf
(62.47 KiB) Downloaded 13 times
Lochmaster4.0-file:
fame_ds-10.zip
(92.62 KiB) Downloaded 18 times

Post Reply