freestompboxes.org

Thought I'd share how I did mine, been putting off sharing but I think I did alright with it, but I've been a long time reader in the forum's but never been a big contributor.
I had help with my first pcb design, and there was a lot of issues with everything, using the photos I saw posted here, I made a rough copy and was going to do the ol peel n stick transfer method, which ended up with me redrawing the traces again in altium designer.

Apart from trying to source enclosures to fit the pcb, i decided to get a bit of 3mm alloy bent for my (What I refer to as ShrEddie)

don't know if you can see the picture i added, but I am pretty happy with the results.

Thanks guys

For C3, C4, and C5 I just noticed I got polarized capacitors and the schematic shows non-polarized. Will this matter? If it does not matter, which way should the (+) side go?

you need bipolar caps on those ones, 80-100 uf 100v you can get from eBay or anyone that sells crossover parts

anyone get their hands on the IR version yet? looking into an upgrade lol

acatlow wrote: ↑09 Jan 2022, 22:38 anyone get their hands on the IR version yet? looking into an upgrade lol

Yeah its cool. Sounds great. Uses the AMT CP-16 board for the IR's
https://amt-sales.com/cabsim/amt-pangaea-cp-16-module/

bmxguitarsbmx wrote: ↑10 Jan 2022, 02:09
Yeah its cool. Sounds great. Uses the AMT CP-16 board for the IR's
https://amt-sales.com/cabsim/amt-pangaea-cp-16-module/

Is this verified?

Verified by someone more trustworthy than me, you mean?

bmxguitarsbmx wrote: ↑11 Jan 2022, 22:19 Verified by someone more trustworthy than me, you mean?

I meant no offence, as I don't know you from a bar of soap, I heard for about a year that it used the cp-16 module but nobody ever took pictures... and I prefer seeing pictures for verification over the internet. sorry I didn't check this forum out for a while, it never gives you email notifications when someone posts something

acatlow wrote: ↑15 May 2022, 22:53 sorry I didn't check this forum out for a while, it never gives you email notifications when someone posts something

you can edit your notification preferences in User Control Panel -> Board preferences -> Edit notification options

ucp.php?i=ucp_notifications&mode=notification_options

karul wrote: ↑15 May 2022, 23:12

acatlow wrote: ↑15 May 2022, 22:53 sorry I didn't check this forum out for a while, it never gives you email notifications when someone posts something

you can edit your notification preferences in User Control Panel -> Board preferences -> Edit notification options

ucp.php?i=ucp_notifications&mode=notification_options

thanks karul, looks like it's working now as I received an email (i changed my settings before you mentioned it but thanks nonetheless)

Anyone made any new progress/tweaks with these builds or have something to share?

din_mentor wrote: ↑18 Mar 2023, 23:00 Anyone made any new progress/tweaks with these builds or have something to share?

I'm workin on a DIY version right now. I simplified the circuit a bit and I think it should still sound the same. Waiting for all the parts to arrive.

I built my DIY version. Turned out pretty good. I posted schematic and info here:
viewtopic.php?t=32600