Mod for Boss DD-3 always on

A forum devoted to mod, tips and suggestions for upgrading and rehousing your VERY CHEAP commercial stompbox to near boutique excellence.
Post Reply
User avatar
philrob1
Information
Posts: 14
Joined: 21 Apr 2010, 20:06
Has thanked: 2 times
Been thanked: 1 time

Post by philrob1 »

Hi all,

Have had some great success in the process of integrating my DD-2/3 (undecided) into my MultiFX board.

Last thing to get my head around is wiring it so it is always on. It doesn't use the standard flip-flop bypass in most Boss pedals, so bridging is out of the equation.

It know it's possible as Pete Cornish does it in his TES model, and my old Cornish Board had a DD-3 in also.

Any help would be greatly appreciated!

Thanks

Schematic:

http://www.synfo.nl/servicemanuals/Boss ... _NOTES.pdf

User avatar
philrob1
Information
Posts: 14
Joined: 21 Apr 2010, 20:06
Has thanked: 2 times
Been thanked: 1 time

Post by philrob1 »

Just to update -

All done. Remove Q010 and bridge across, removing the Diode pin. LED isn't "On" but that matters not for my intended use.

Post Reply