Roland CH-60
Posted: 15 Mar 2022, 20:37
So I recently got a Roland CH-60 for a song on ebay.
Roland Cubes are a part of my past, I used to load my Dad's Orange Cube 40 into the back of our Brown Austin Allegro on gig nights. It was the first amp I used and I'm mostly a jazzer so it's clean and I like that
The CH-60 also packs the Boss CE-2 chorus or very near to it, which was my Dad's favourite pedal (back when he used them). It is concerning that that I'm posting tonight.
They've hard wired a very slow deep chorus on it 3k3 resistor + 100k resistor going from pin 1 of the 4558 instead of 10k + 100k linear pot.
I'm figuring I can replace the 100k resistor for a trimpot. I'm aiming for an almost leslie speed, I guess I could socket the resistors and experiment - does anyone have any advice ?
Roland Cubes are a part of my past, I used to load my Dad's Orange Cube 40 into the back of our Brown Austin Allegro on gig nights. It was the first amp I used and I'm mostly a jazzer so it's clean and I like that
The CH-60 also packs the Boss CE-2 chorus or very near to it, which was my Dad's favourite pedal (back when he used them). It is concerning that that I'm posting tonight.
They've hard wired a very slow deep chorus on it 3k3 resistor + 100k resistor going from pin 1 of the 4558 instead of 10k + 100k linear pot.
I'm figuring I can replace the 100k resistor for a trimpot. I'm aiming for an almost leslie speed, I guess I could socket the resistors and experiment - does anyone have any advice ?