Page 1 of 1
Fuzz face with old mullard oc200, oc202, oc206?
Posted: 20 Mar 2022, 22:02
by Fuzz1997
Have a bunch of old mullard branded oc200, oc202, and oc206 transistors but they don’t sound great with a stock fuzz face circuit. I tried reducing the 100k resistor which helped some but introduced a high squeal when the volumes cranked. I tried a resistor jumper from collector from q1 to its base but wasn’t a fan of the sound. Any other suggestions? I’m using 6.8k to bias the collector of q2. Much thanks!
Re: Fuzz face with old mullard oc200, oc202, oc206?
Posted: 21 Mar 2022, 22:01
by ppluis0
Hi Fuzz1997 and welcome to this forum !
The datasheets of transistors you have reveals unusual low gain values (OC200= 15; OC202= 40 and OC206= 16 times)
Perhaps someone here has experience to implement fuzz circuits with similar low gain silicon PNP's
Cheers,
Jose
Re: Fuzz face with old mullard oc200, oc202, oc206?
Posted: 22 Mar 2022, 02:19
by Fuzz1997
ppluis0 wrote: ↑21 Mar 2022, 22:01
Hi Fuzz1997 and welcome to this forum !
The datasheets of transistors you have reveals unusual low gain values (OC200= 15; OC202= 40 and OC206= 16 times)
Perhaps someone here has experience to implement fuzz circuits with similar low gain silicon PNP's
Cheers,
Jose
Hi Jose! The gain of the transistors I used are q1=51 ; q2 = 81. Would love to hear what people have tried!
Re: Fuzz face with old mullard oc200, oc202, oc206?
Posted: 22 Mar 2022, 06:54
by Manfred
These might be projects for these Germaniums.