Keeley Rat mods
- tonymcbony
- Breadboard Brother
Edit: R8 had a strange value, removed from schem
Last edited by tonymcbony on 01 Sep 2022, 11:29, edited 2 times in total.
- Ichabod_Crane
- Resistor Ronker
Is R8 1.6k?
- tonymcbony
- Breadboard Brother
Apparently, according to initial scratchings.
That one and c7 seem a bit off
That one and c7 seem a bit off
- bajaman
- Old Solderhand
Information
- Posts: 4549
- Joined: 26 Jun 2007, 21:18
- Location: New Brighton, Christchurch, NZ
- Has thanked: 596 times
- Been thanked: 2061 times
1.6k - NO
be kind to all animals - especially human beings
- bmxguitarsbmx
- Cap Cooler
Is there a lot of clipping happening in the jet buffer? Biased as it is, it wouldn't have the most headroom. I must admit to only ever playing a Rat once.
I used to know a young "anarcho-communist" couple that worked at Proco in Kalamazoo. When they quit, they "liberated" a few thousand feet of instrument cable and all the connectors to make cables for the rest of time. It was weird because they always talked about how much they liked working there.
I used to know a young "anarcho-communist" couple that worked at Proco in Kalamazoo. When they quit, they "liberated" a few thousand feet of instrument cable and all the connectors to make cables for the rest of time. It was weird because they always talked about how much they liked working there.
- tonymcbony
- Breadboard Brother
Would switching 10k to 1k increase overall output of the pedal, or just clip more?
- tonymcbony
- Breadboard Brother
So I’ve done the mods that are listed in that schem now (didn’t touch the erroneous 1M resistor ones but they’ve been edited out of schem now)
It’s got a lot more bass and a LOT more gain - it sounds better but loses the lower gain settings a bit.
Will be trying to tinker with the R4/C6 to trim it out a little
It’s got a lot more bass and a LOT more gain - it sounds better but loses the lower gain settings a bit.
Will be trying to tinker with the R4/C6 to trim it out a little