RoG Phozer (with a twist)

Original effects with schematics, layouts and instructions, freely contributed by members or found in publications. Cannot be used for commercial purposes without the consent of the owners of the copyright.
Post Reply
User avatar
sharptrickster
Information
Posts: 5
Joined: 05 Feb 2023, 13:12
Has thanked: 2 times
Been thanked: 2 times

Post by sharptrickster »

I wondered if I could swap the LED/LDR (or opto) for a FET, mosFET or 4049 gate (inspired by the PUP phaser series).

Here's the original: http://www.runoffgroove.com/phozer.html
Image

I wanted to add a buffer, and that leaves me one opamp left on a quad, so I thought: "What if I add dry non-inverted signal to the inverted filtered signal? The other frequencies should cancel out and the peaks should get "peakier", right?
Image

LTSpice kinda agrees:
("r" being the resistance from point A and B to GND, where the opto is originally)

Image
Image

And a sweep through the "r" range:
Image
Image

The thing I noticed is: The phase goes from: -90, 0, -360 to... WILD negative values.
Does it mean auto-oscilation and weird behavior?
Any suggestions on this one?

Post Reply