Shub-niggurath / EQD Hoof with blend

Original effects with schematics, layouts and instructions, freely contributed by members or found in publications. Cannot be used for commercial purposes without the consent of the owners of the copyright.
Post Reply
User avatar
WrmZ
Information
Posts: 8
Joined: 04 May 2019, 20:22
Has thanked: 5 times
Been thanked: 17 times

Post by WrmZ »

Shub-niggurath - Lovecraftian deity called also black goat of the woods with thousand young

Second one in series, based on the EQD Hoof traced by Kit Rae at http://www.bigmuffpage.com/Big_Muff_Pi_ ... part4.html
It has FET blend circuit and Mpsa18 placed in Q1, Leds are Green for Q2 and Orange for Q3, also it has some slight changes in tone stack.

Whole project with gerbers: Shub-niggurath project on GitHub
PCB was tested and assembled and its working.

schematic and assembled pcb:
shubniggurath_schematic.png
shubniggurath_assembled.jpg
Top
User avatar
blackboarcult
Information
Posts: 42
Joined: 28 Mar 2018, 19:18
my favorite amplifier: one that works.
Location: Norway
Has thanked: 56 times
Been thanked: 53 times

Post by blackboarcult »

I'm a sucker for Cthulhu mythos references :twisted: how does it sound compared to the stock one?
Top
User avatar
WrmZ
Information
Posts: 8
Joined: 04 May 2019, 20:22
Has thanked: 5 times
Been thanked: 17 times

Post by WrmZ »

blackboarcult wrote: ↑22 Apr 2023, 06:58 I'm a sucker for Cthulhu mythos references :twisted: how does it sound compared to the stock one?
Hard to say - I don't own eqd hoof and I need to repair my Big muff to compare.
I will try to record some samples next week with guitar and bass.

About cthulhu stuff - i got two more pedals in mind also with cthulhu flavour but i probably start working on them sometime in autumn
Top
Post Reply

Return to “DIY Projects”