Tc electronics t2 issues/repair

Forum dedicated to helping people debug and troubleshoot non-functional pedals or builds. Please use an clear and informative title, indicating circuit and basic problem. Don't forget to mark the issue as fixed if this is the case.
Post Reply
User avatar
9 volt
Information
Posts: 47
Joined: 05 Jan 2008, 02:24
Location: AUSTRALIA
Has thanked: 1 time
Been thanked: 1 time

Post by 9 volt »

Hi all, I have a tc electronics t2 (digital reverb). It’s generating its own noise, when I change the reverb settings I can hear that it has an influence on the noise. I have audio traced the signal to the ak4556 ad da ic. The signal gets to there then seems to have the noise on pin 8. I’m wondering if this means the ic has blown? I can’t find schematics unfortunately. Thanks all

User avatar
9 volt
Information
Posts: 47
Joined: 05 Jan 2008, 02:24
Location: AUSTRALIA
Has thanked: 1 time
Been thanked: 1 time

Post by 9 volt »

The schematic for hall of fame looks very similar
See link
https://service-tcgroup.tcelectronic.co ... server.asp

Post Reply