Dan N wrote:There is no C24.Fastnet wrote: Am I correct in you saying "move Lug2 to C24?".
Sorry, what I ment to say.... "C24" was the grid reference on the vero
Regarding the 500k pot.... will a standard 100k wah pot be a "drop in" replacement requireing no further amendments on the board?
Not a problem Scruffie, I've always enjoyed the builds no matter the frustrations... Dan's completely correct in saying "it was a nice thing to do" and I'd be first in line to second that.Scruffie wrote:Has anyone actually compared my layout to the schematic because I certainly haven't, could be completely wrong!
It was mererly an attempt at one... don't think I have time to check it or certainly build it.
An incidental Q... Are the "Superbright" variety just capable of withstanding a greater current or purely more efficient?Dan N wrote:LEDs need a current limiting resistor or the full charge of your battery can kill them. Attach at least a 1K resistor to one leg of the LED and you'll be good.
Just the ticket!analogguru wrote:You don´t need photobucket for this. Download the freeware program XnView:RnFR wrote:you can do that at an image hosting site like photobucket. just upload the image, then you can manipulate it however you like, and then save it again. or just link to the photobucket address.Fastnet wrote: I wanted to post some pics but can't work out how to shrink them for the memory size.. Anyone?
http://www.xnview.com/
and you can cut away the unnecessary surrounding area, convert the pixel/inch, change colors, and convert from one format to another with a mouse click.
analogguru
Thanks Gents, I'll report back with the pics and results.
Regards,
J.