Page 1 of 1
Fulltone - Supa Trem
Posted: 06 Oct 2007, 22:01
by freedreamer
Posted: 07 Oct 2007, 02:55
by bajaman
As mentioned elsewhere - it is a copy of the Demeter tremulator, with a few mod switches added. Check out my Baja Trembulator in the Projects section for a smoother sine wave oscillator version
cheers
bajaman
Posted: 07 Oct 2007, 07:40
by sergedeep
In all the gut pics I have seen from the Supa Trem, I never saw any zener diodes as in the Demeter. Can anyone confirm that they are not on the board, or are they just not shown on the pics?
Posted: 07 Oct 2007, 09:39
by bajaman
The zeners are only there to limit the oscillator output level - I found them to be unnecessary as obviously Fuller has too.
Cheers
bajaman
Re: Fulltone - Supa Trem
Posted: 28 Mar 2012, 14:02
by JVanDe7
I just bought one of these. I noticed Mike used black marker to cover up the value of some of the caps...
I have a question about a possible mod-
This is a great tremolo, but the one thing it lacks is the waveshape knob like the BOSS TR-2. Actually it has somehting like that but it's an internal trimpot, and it only adjusts the "soft" mode.
Any reason why I can't mount an external pot and do it that way? It would help eliminate the only downfall of this pedal. Which is the fact that it only has a hard mode and a soft mode. No knob to adjust, other than the trimpot which only adjusts the soft mode. That really should be an external control IMO. The BOSS TR-2 has it right, but the BOSS suffers from noise and tone muffle (a little bit).
