Toneczar - Openhaus

madbean · Post by **madbean** » 01 May 2010, 02:53

Well, that was clear as mud.

RnFR · Post by **RnFR** » 01 May 2010, 03:11

it seems like someone already tried to talk this through with you and they left mystified. now they are asking for advice here. can you blame them? maybe if you really did try to explain it better, none of this would happen. why not here?

briggs · Post by **briggs** » 01 May 2010, 03:38

RnFR wrote:ed,

don't you think people have a right to wonder aloud why they aren't allowed by you to buy your product? now not only can they not buy your product, but they can't talk about it either? whatever the reason might be? come on man, really?

Reminds me of the apartheid.....

I thought that sort of selective discrimination was illegal nowadays?

oldgravity · Post by **oldgravity** » 01 May 2010, 03:54

briggs wrote:
Reminds me of the apartheid.....

Well, now, this may be going a bit far.

It's just guitar pedals, man, they don't really matter.

Greg · Post by **Greg** » 01 May 2010, 04:51

Can someone point me to.. or post, the offending text please.
I can't see it on the Ebay link or on the website..
Thanks.

edit.. sorry, now I see it.

IvIark · Post by **IvIark** » 01 May 2010, 10:30

RnFR wrote:now not only can they not buy your product, but they can't talk about it either?

The first rule of Tone Club, you do no talk about Tone Club.
The second rule of Tone Club, you DO NOT talk about Tone Club.

Post by **modman** » 02 May 2010, 11:55

Catfight fodder to be?
Missinformation: the truth about a pedal according to a local beauty queen?

Don't feed the trolls, please

plugzzzz · Post by **plugzzzz** » 06 May 2010, 13:14

i just trace the pcb layout using the pictures that are here... i dont know if i miss some traces but im sharing what i have

NOTE: Edited by moderator. See post below.

culturejam · Post by **culturejam** » 06 May 2010, 18:32

Not trying to be a heavy-handed jerk or anything, but I pulled the files uploaded by plugzzzz. They appear to be exact duplicates of the original PCB artwork, and thus could possibly run afoul of US copyright law. Fair use might apply here, but in the interest of risk management, I have removed the files. That's too many conditionals for me to feel comfortable.

The mods will have a look-see at some legal guidelines in the near future and see if we can make a determination as to the legality of the images.

Again, I apologize for stepping in and censoring a user's post, but it seems like the most prudent course of action at this point.

IvIark · Post by **IvIark** » 06 May 2010, 19:04

Nice work though plugzzzz

madbean · Post by **madbean** » 06 May 2010, 19:30

culturejam wrote:Not trying to be a heavy-handed jerk or anything, but I pulled the files uploaded by plugzzzz. They appear to be exact duplicates of the original PCB artwork, and thus could possibly run afoul of US copyright law. Fair use might apply here, but in the interest of risk management, I have removed the files. That's too many conditionals for me to feel comfortable.

The mods will have a look-see at some legal guidelines in the near future and see if we can make a determination as to the legality of the images.

Again, I apologize for stepping in and censoring a user's post, but it seems like the most prudent course of action at this point.

I thought the same when I saw the post. But, very tight work plugzzzz, all the same.

plugzzzz · Post by **plugzzzz** » 09 May 2010, 09:22

openhaus clone in progress

sinner · Post by **sinner** » 09 May 2010, 10:33

Nice done replica

Good job with the PCB

thanks

culturejam · Post by **culturejam** » 09 May 2010, 15:11

How much were those knobs? I'm cringing, because knobs like that usually run about $4 - $5 each.

plugzzzz · Post by **plugzzzz** » 09 May 2010, 16:59

culturejam wrote:How much were those knobs? I'm cringing, because knobs like that usually run about $4 - $5 each.

3$/each

telecaster · Post by **telecaster** » 09 May 2010, 17:11

Hmmm, I'll have to check my stove.

coldcraft · Post by **coldcraft** » 14 May 2010, 03:07

has anyone given any thought into what's going on with the third gain stage there? The one that looks like a FF with a SRPP/Mini-Booster Active Load for the top half?

This, and Rick's Superheated SHO, got me thinking about taken other, single or feedback connect gain stages and given them the FET-Top treatment. Does this circuit always minimize biasing headaches, or are there times where it would be less appropriate?

plugzzzz · Post by **plugzzzz** » 22 May 2010, 10:01

project progress just waiting for the switches

anyways on the GE trannys can i use 2n388 it has the same pinout and HFE range compare to (2n1306) is 2n1306 the verified GE trannys

hbo · Post by **hbo** » 24 May 2010, 22:01

Just discovered this thread a few days ago. Thanks for all the great work you guys've done so far.
Thought I'd contribute with a vero layout of the schematic abfackeln posted on page 5 or 6 (or somewhere thereabout).

http://www.sabrodesign.com/wp-content/u ... enhaus.gif

I'm going to try this build eventually, but as of right now the layout is unverified, though I did go over it three times.
Enjoy!

sinner · Post by **sinner** » 24 May 2010, 22:09

impressive

Toneczar - Openhaus [traced]