3pdt foot switch

uglycustard · Post by **uglycustard** » 13 Nov 2009, 14:25

Hi folks.

I'm new to the site but have had great fun building a "colorsound one knob fuzz as found on this site.It works great and havnt heard that vintage fuzz sound for years.Could anyone help me with wiring in a foot-switch? I have a 3PDT switch with 9-pins! not sure how to wire it between the 2 jack sockets. many thanks

steve

.Mike · Post by **.Mike** » 13 Nov 2009, 14:44

Hi,

These links will probably help you:

http://www.tonepad.com/project.asp?id=35

http://www.generalguitargadgets.com/ind ... &Itemid=27

Mike

Dr Tony Balls · Post by **Dr Tony Balls** » 13 Nov 2009, 14:44

i'd type up a response but so many others have already done better jobs than I would. so here you go:

http://www.beavisaudio.com/techpages/StompboxWiring/

uglycustard · Post by **uglycustard** » 13 Nov 2009, 16:43

thankyou for the help the information was spot on, I've now got it working with the foot switch.
going to have some fun this forum I think

cheers lads
steve