When I read your project files I feel like I'm eating dinner at the kiddie table wondering what the adults are talking about.
Yeesh.
Re: Digital reverb engine AL3201
Posted: 22 Feb 2010, 22:44
by KMG
As the experiment I tried to make the imitation of analog delay.
ATMEGA measures the position of potentiometers (through ADC) and dynamically changes DSP program: delay factor and feedback depth.
This chip allows to load from 1 instruction to whole program buffer. So for this imitation I have to modify only two instructions (this takes very short time). Full illusion of analog delay.
Re: Digital reverb engine AL3201
Posted: 22 Feb 2010, 23:41
by JiM
The CoolAudio V1000 (copy of the AL3201), an audio codec and an Atmel microcontroller are available for cheap in most digital Behringer pedals : DD-600, DR-600, FX-100, etc. (not the "machine" ones, they use a bigger DSP).
The easiest mod would be to disconnect the controller, and use 4 switches to select one of the 16 presets. The more complicated mod would involve custom programming of the DSP, thru custom programming of the controller.
I still have to dump the I²C messages between the controller and the DSP on my DD-600, before trying to re-program them ...
but i've been playing more with my guitar than my soldering iron lately
Ooops, maybe that's why i had problems with the I²C sniffing ... must. read. datasheet. carefully.
And thanks for the source code !
I'll port that on Arduino when i find some time.
Re: Digital reverb engine AL3201
Posted: 10 Jul 2010, 07:13
by iorobyy
hello guys!
I'm new in this forum.
i need a project using v1000 chip ...i've found this project but now the links seems not working.
Could anyone help me to recover all the files / informations.
Thnkkks
Re: Digital reverb engine AL3201
Posted: 15 Jul 2010, 22:10
by rocklander
shame the links have gone astray.. I'd be interested in seeing more applications of the v1000 chip... any reason it appears to be passed over?
Re: Digital reverb engine AL3201
Posted: 16 Jul 2010, 07:46
by KMG
Wait several days, process of moving domain name to new IP address.
Immediately you can get information by changing domain name in links to IP address. http://217.119.30.118/~kmg/
Re: Digital reverb engine AL3201
Posted: 17 Jul 2010, 19:15
by Dirk_Hendrik
Never seen this thread before. Even without those file I think KMG is going to be on my cool list for the next couple of weeks.
Re: Digital reverb engine AL3201
Posted: 17 Jul 2010, 22:47
by andre
FYI here's a little demonstration of my Femtoverb, a AL3201 based circuit, for which I build a controller with an LCD display and some buttons.
The demo shows all of the factory presets.
There is some reverb audible even in the non reverb presets because I forgot to turn of my amps reverb, but still the demo will give a good impression of the AL3201's presets
Re: Digital reverb engine AL3201
Posted: 18 Jul 2010, 11:00
by Dirk_Hendrik
Nice one!!
Re: Digital reverb engine AL3201
Posted: 19 Jan 2022, 05:49
by nissan62
Добрый день друзья. У меня испортился микшер behringer xenyx 1002fx. Испортился ATmega8 который загружает пресеты в процессор V1000. (AL3201)!!!! Где можно найти прошивку для ATmega8? Может чем то сможете помочь?
Re: Digital reverb engine AL3201
Posted: 27 Jan 2022, 18:23
by MerlynMetal
I was looking how to replace the internal AL3201 programs and came upon this thread. So my question is are there any free FX files available for this chip (interested mostly in delays) and a guide how to load them into the chip?
