Night Train, a bluesy overdrive

Original effects with schematics, layouts and instructions, freely contributed by members or found in publications. Cannot be used for commercial purposes without the consent of the owners of the copyright.
Post Reply
User avatar
pz
Solder Soldier
Information
Posts: 217
Joined: 17 Aug 2007, 16:55
Location: Germany/Poland
Has thanked: 2 times
Been thanked: 48 times

Post by pz »

Here's the project based on Arsenio's TubeSoundOverdrive circuit.
I decided to give it a name, that some time ago my friend came up with, a good name for mid gain, very "ampy" and touch sensitive pedal :)
So, here it is:

NIGHT TRAIN OVERDRIVE PROJECT pdf file with schem and pcb project.

Previous thread about Tube Sound Overdrive

Two sound samples: PRS Santana SE -> PandoraPX4D used as SpeakerSim -> PC.
Sound Sample 1
Sound Sample 2

During the tweaks and breadboarding i recorded a clip with soft scope (visual analyser) showing how is the waveform and frequency spectrum changing according to the input signal amplitude. Unfortunately due to high compression level at youtube the quality is poor.


And last, but not least here's the 3D model of the pedal with graphics i designed some time ago for another, finally abandonned project.
3D model

I'm working on a simpler version with only 1 or 2 knobs. I'll post it as soon as i finish it.

User avatar
frank.clarke
Breadboard Brother
Information
Posts: 114
Joined: 25 Oct 2007, 19:00
Been thanked: 1 time
Contact:

Post by frank.clarke »

Thanks for all your work and documentation!

User avatar
Aharon
Solder Soldier
Information
Posts: 187
Joined: 16 Aug 2007, 23:39
Location: Canada
Has thanked: 24 times
Been thanked: 5 times

Post by Aharon »

I like it a lot,thanks
Aharon

User avatar
modman
a d m i n
Information
Posts: 4817
Joined: 19 Jun 2007, 16:57
Has thanked: 4287 times
Been thanked: 2008 times

Post by modman »

wow, great work here!
thanks pz
Please, support freestompboxes.org on Patreon for just 1 pcb per year! Or donate directly through PayPal

User avatar
guiltyspark
Solder Soldier
Information
Posts: 202
Joined: 18 Aug 2007, 05:24
Has thanked: 3 times
Been thanked: 39 times

Post by guiltyspark »

Nice project, great name too. Isn't "Night Train" a cheap wine like "Mad Dog"?

Guiltyspark

User avatar
pz
Solder Soldier
Information
Posts: 217
Joined: 17 Aug 2007, 16:55
Location: Germany/Poland
Has thanked: 2 times
Been thanked: 48 times

Post by pz »

guiltyspark wrote:Nice project, great name too. Isn't "Night Train" a cheap wine like "Mad Dog"?
I have no idea:) My friend came up with this name.
Although the country i come from has a very long tradition in prodution of cheap wine ;) and of course in naming the products, like, directly translated: "The blood of the village administrator", or simply "220V" :)

Edit:
due to requests i uploaded an updated pdf file with two simpler versions.
LINK

User avatar
guiltyspark
Solder Soldier
Information
Posts: 202
Joined: 18 Aug 2007, 05:24
Has thanked: 3 times
Been thanked: 39 times

Post by guiltyspark »

I googled it, yup! Cheap bum wine!

Night Train Express
17.5% alc. by vol.

Don't let the 0.5% less alcohol by volume fool you, the Night Train is all business when it pulls into the station. All aboard to nowhere - woo wooo! The night train runs only one route: sober to stupid with no roundtrip tickets available, and a strong liklihood of a train wreck along the way. This trainyard favorite is vinted and bottled by E&J Gallo Winery, in in Modesto, CA. Don't bother looking on their web page, because they dare not mention it there. As a clever disguise, the label says that it is made by "Night Train Limited." Some suspect that Night Train is really just Thunderbird with some Kool-Aid-like substance added to try to mask the Clorox flavor. Some of our researchers indicated that it gave them a NyQuil-like drowsiness, and perhaps this is why they put "night" in the name. The picture (above right) shows that the subject that drank Night Train is down for the count, while the Cisco guzzling subject is ready to rock. Guaranteed to tickle your innards.

User avatar
pz
Solder Soldier
Information
Posts: 217
Joined: 17 Aug 2007, 16:55
Location: Germany/Poland
Has thanked: 2 times
Been thanked: 48 times

Post by pz »

Night Train Overdrive[/b]
Revision 2.0

Just built this pedal for myself. Sounds great with single coils!
I had only double sided pcb, so the top layer is used for jumpers and as a screening ground plane.
There are some changes in the schematic, here's the final one:
NTv2.gif
NTv2.gif (8.31 KiB) Viewed 3126 times
If you are bored with 1000s variations of the TS OD i think you shoud try this one.

Here's a sound sample. Recorded using software VST speaker simulation (impulse convolver, ENGL 412 cab) with a touch of reverb. I tried to show how does the pedal react to different pickups, volume knob, different playing like open chords or single notes, palm muting etc. There's also a fragment with wah in front of the pedal.

Sound sample (2.5MB)

Some photos from the building process:
pcb1.jpg
pcb1.jpg (35.13 KiB) Viewed 2464 times
nt4.jpg
nt2.jpg
nt3.jpg

User avatar
pz
Solder Soldier
Information
Posts: 217
Joined: 17 Aug 2007, 16:55
Location: Germany/Poland
Has thanked: 2 times
Been thanked: 48 times

Post by pz »

nt1.jpg
nt5.jpg
nt6.jpg

User avatar
floris
Cap Cooler
Information
Posts: 472
Joined: 14 Oct 2007, 12:05
Has thanked: 230 times
Been thanked: 72 times

Post by floris »

Nice build, congratulations!
Neat PCB, clean guts, good looking enclosure: It's got it all! :D

User avatar
briggs
Tube Twister
Information
Posts: 1971
Joined: 12 Jul 2007, 10:02
my favorite amplifier: Briggs Custom Suprono
Completed builds: Too many to still class myself as sane....
Location: Breaking into Heaven.
Has thanked: 27 times
Been thanked: 126 times
Contact:

Post by briggs »

Great looking project pz! You've got some really great sounds from that circuit 8)
Image

I am Klon.

Post Reply