Page 1 of 1
Wanted Philips/Mullard 20µF and 2.5µF caps
Posted: 28 Mar 2010, 22:44
by peps1
After Philips/Mullard Axial Electrolytic
20µF/64V
20µF/16V
2.5µF/64V
2.5µF/16V
Can offer cash, parts, or PCB etching service.
Re: Wanted Philips/Mullard 20µF and 2.5µF caps
Posted: 29 Mar 2010, 17:52
by peps1
oh......and Marcon Axial Electrolytic caps of the save value too
Re: Wanted Philips/Mullard 20µF and 2.5µF caps
Posted: 30 Mar 2010, 11:27
by sinner
Re: Wanted Philips/Mullard 20µF and 2.5µF caps
Posted: 01 Apr 2010, 06:13
by peps1
Sent a message though the sites "Ask us a question" box a few days ago, but nothing back....will try emailing him.
(Why do i get the feeling you got the last of the stock for your FF clones
)
Re: Wanted Philips/Mullard 20µF and 2.5µF caps
Posted: 01 Apr 2010, 06:30
by sinner
peps1 wrote:Sent a message though the sites "Ask us a question" box a few days ago, but nothing back....will try emailing him.
(Why do i get the feeling you got the last of the stock for your FF clones
)
I'm not that anal
I wish to have the right ones, but I'm fine with 2,2/22uF combo
I've also send him messages many times, never replied
Re: Wanted Philips/Mullard 20µF and 2.5µF caps
Posted: 01 Apr 2010, 06:41
by peps1
Re: Wanted Philips/Mullard 20µF and 2.5µF caps
Posted: 01 Apr 2010, 06:43
by sinner
What I've said?
Re: Wanted Philips/Mullard 20µF and 2.5µF caps
Posted: 01 Apr 2010, 06:56
by peps1
But iv read, if you use a 22uF capacitor instead of a 20uF.....the MOJO gets stuck in the extra 2uF!?!?
Re: Wanted Philips/Mullard 20µF and 2.5µF caps
Posted: 01 Apr 2010, 07:05
by sinner
What can I say, I gonna use NKT274's in my germanium replica, so I'm already one short
Re: Wanted Philips/Mullard 20µF and 2.5µF caps
Posted: 01 Apr 2010, 07:25
by peps1
But that makes sense to me, NKT274 have more hot fuzz and 275's are all fake, Leakey or REALLY expensive to match.......germanium is trouble, Im going with BC108's!!! (And cheap AC128s
) but since I have the Phillips 0.01uf moulded yellows too, I may buy some BC183L and slap some uba mojo fuzz face kits on ebay to.......just got to find theses allusive Philips/Mullard 20µF
Re: Wanted Philips/Mullard 20µF and 2.5µF caps
Posted: 01 Apr 2010, 07:51
by sinner
I'm going to build one on BC108's to, I have a lot of BC108
C, and a nice selection of old stock BC108's are coming to me now. I don't thing FF was done withe BC108 (without "C")
Also, I have some BC183L's from Mictester (thank you Sir
) and some more from vintage-parts.com (I've got em to cross up shipping charges), and the hybrid one I've posted couple weeks ago. Now I'm starting to think about the BC209C... I really need to stop!
But it's so much fun. Apart of the hybrid one, I don't care about the sound of the rest of my replicas, they need to look nice, that's all
