Page 1 of 1
Where to buy blank pcb boards to etch
Posted: 06 Apr 2010, 12:18
by gtr2
Where is a good place to buy blank pcb boards. I'm having a hard time locating boards to etch.
Re: Where to buy blank pcb boards to etch
Posted: 06 Apr 2010, 17:56
by sinner
gtr2 wrote:Where is a good place to buy blank pcb boards. I'm having a hard time locating boards to etch.
Every electronic supply store???
Re: Where to buy blank pcb boards to etch
Posted: 06 Apr 2010, 18:31
by theehman
gtr2 wrote:Where is a good place to buy blank pcb boards. I'm having a hard time locating boards to etch.
Radio Shack. Oh wait, you said a GOOD place....
Re: Where to buy blank pcb boards to etch
Posted: 06 Apr 2010, 18:40
by sinner
Re: Where to buy blank pcb boards to etch
Posted: 06 Apr 2010, 18:57
by gtr2
My local radio shacks charge high prices for them... Is there a part number anyone has for mouser?
Re: Where to buy blank pcb boards to etch
Posted: 06 Apr 2010, 22:11
by defaced
Mouser carries MG Chemicals copper clad board. Many sizes and such, so I'm not going to spec a part number, but here's the catalog page:
http://mouser.com/catalog/catalogUSD/641/2165.pdf
Typical board is 1/16", single sided, 1oz copper.
Re: Where to buy blank pcb boards to etch
Posted: 07 Apr 2010, 16:53
by gtr2
Thanks!
Re: Where to buy blank pcb boards to etch
Posted: 07 Apr 2010, 17:01
by 5thumbs
I've been buying them off eBay with good results. Better price and selection than the local Rat Shack.
Re: Where to buy blank pcb boards to etch
Posted: 08 Apr 2010, 16:13
by Tremendous Lunch
I do ebay as well. I've been spending about $10 for 12 for boards shipped.
Re: Where to buy blank pcb boards to etch
Posted: 08 Apr 2010, 16:48
by lolbou
gtr2 wrote:I'm having a hard time locating boards to et
You did not mention your etching method...
