20kA 9mm Pots

irmcdermott · Post by **irmcdermott** » 13 Apr 2010, 21:48

Hey all,

I'm going to build an MI Audio GI Fuzz for a friend and want to lay it out just like the original with the 4 pots along the top of the 1590B. The only way I thought I could do this was to get the 9mm pots. One of the pots is a 20kA and i'm having a hard time finding one of that value online (checked smallbear's stock and mouser). Any ideas on where to get them, or do I need to look for another part to get all 4 along the top? Here's a picture from the site:

http://www.mieffects.com/GI.htm

How would you do it and what would you use? Thanks everyone!

ian

jb351 · Post by **jb351** » 14 Apr 2010, 12:57

Digikey or Allied might have them.

irmcdermott · Post by **irmcdermott** » 15 Apr 2010, 00:13

thanks. they don't. in fact, i'm not even sure alpha makes them in 20kA. anyway, i posed the same question on madbean's forum and he helped me out. thanks again!

DeanM · Post by **DeanM** » 15 Apr 2010, 22:29

I havent checked but ya could try radionics, farnell, maplin, futurlec. dunno if any of those be any good