freestompboxes.org

Hey all,

I'm going to build an MI Audio GI Fuzz for a friend and want to lay it out just like the original with the 4 pots along the top of the 1590B. The only way I thought I could do this was to get the 9mm pots. One of the pots is a 20kA and i'm having a hard time finding one of that value online (checked smallbear's stock and mouser). Any ideas on where to get them, or do I need to look for another part to get all 4 along the top? Here's a picture from the site:

http://www.mieffects.com/GI.htm

How would you do it and what would you use? Thanks everyone!

ian

Digikey or Allied might have them.

thanks. they don't. in fact, i'm not even sure alpha makes them in 20kA. anyway, i posed the same question on madbean's forum and he helped me out. thanks again!

I havent checked but ya could try radionics, farnell, maplin, futurlec. dunno if any of those be any good