Divided By 13 - Joyride Overdrive

sevinisthenumber · Post by **sevinisthenumber** » 06 May 2010, 22:55

Got one of these in the shop for repair so I de-gooped it and here ya go... Transistors are un marked but look like bc108's or something in that area..

sevinisthenumber · Post by **sevinisthenumber** » 06 May 2010, 22:57

More:

madbean · Post by **madbean** » 06 May 2010, 23:17

Pretty nice build quality in there. A step above a lot of other junk you see.

Greg · Post by **Greg** » 06 May 2010, 23:19

Yep..
Nice work with the pics too..
I believe it's a version of the Coloursound Overdriver.

sevinisthenumber · Post by **sevinisthenumber** » 06 May 2010, 23:25

I like the Velcro idea! May have to do that one!

RnFR · Post by **RnFR** » 07 May 2010, 01:38

except for the pulldowns on the jacks.

oldfatbubba · Post by **oldfatbubba** » 15 May 2010, 12:21

RnFR wrote:except for the pulldowns on the jacks.

Yeah, that is one big glop of cold slobber...

cpm · Post by **cpm** » 15 May 2010, 14:38

huge box is that

sst4270 · Post by **sst4270** » 03 Jun 2010, 21:39

I'm curious... What was the problem with the pedal? (That it needed repair)

Steve

sevinisthenumber · Post by **sevinisthenumber** » 08 Jun 2010, 22:58

Bad 3pdt.

jimbob_400 · Post by **jimbob_400** » 21 Jun 2010, 20:29

whats wrong with pulldown resistors on jacks?

dune2k · Post by **dune2k** » 21 Jun 2010, 22:13

They are always in the signal path and might filter out some frequencies (resistor + capacitance of the cables = high pass filter).

MullisMan · Post by **MullisMan** » 26 Sep 2010, 02:11

I also got a joyride in for repair...looks like the 3pdt switch too. Going by sevenisthenumber's pictures and the stompbox I have, I think I've got a schematic worked out. If anybody wants to verify it or sees something wrong with it feel free to correct me. It does indeed look like a coloursound overdriver with a few cap values switched.

I included a 1n4001 and input filter cap which isn't present on the actual Joyride I have in front of me. I am wondering about C1 in the schematic, it's the 22uF cap, and the polarity looks a little weird to me but that's what the layout is on the actual PCB. The goop is still on this Joyride but most of the component values weren't even covered by it....lot of trouble for nothing. Does anybody know why the LED has the goop all over it? Why hide that?

I also realized after posting this that the Volume Pot value and the Drive Pot value are switched, the Drive pot should be a 10kB pot, and the volume should be a 100kB pot. Sorry about that.

Anyway, without further ado:

Kregg · Post by **Kregg** » 26 Sep 2010, 02:57

I've always thought of gooper's as rank amateurs. I'm surprised that Fred does this to his pedals, he should be proud to show off his skills.
I have an LDW 17/39, it reminds me of a second hand Marshall that my brother used to play ... only it doesn't eat tubes.

Greg · Post by **Greg** » 26 Sep 2010, 04:36

This isn't goop to hide components or values..
this is some (misconstrued ?) effort to stabilise or something.

Kregg · Post by **Kregg** » 26 Sep 2010, 22:18

Greg_G wrote:This isn't goop to hide components or values..
this is some (misconstrued ?) effort to stabilise or something.

At least he hasn't gone completely Ken Fischer (RIP) ... with the red coated wire gris-gris silliness.
If I ever sniff synthetic cork I'll build a faraday cage around every circuit board.

MullisMan · Post by **MullisMan** » 26 Sep 2010, 22:22

Other than the stabilizing goop, this seems like a pretty good build. Fred does nice work. Anybody see anything weird in the schematic? I'm gonna build this if I can, I've never gotten a chance to play a coloursound.

juanro · Post by **juanro** » 03 Aug 2011, 23:09

Bump!

I'm looking into building this, but I think there is something wrong with C3 in the Joyride schematic posted above. Any help?

Regards
Juanro

bubstance · Post by **bubstance** » 04 Aug 2011, 00:03

juanro wrote:Bump!

I'm looking into building this, but I think there is something wrong with C3 in the Joyride schematic posted above. Any help?

Regards
Juanro

Yeah, according to the Colorsound Overdriver schematic (the pedal this box is a 99% clone of) has that 22uF Electro going to ground instead.

RnFR · Post by **RnFR** » 04 Aug 2011, 00:29

it's the same thing as going to ground as far as AC is concerned. but it still doesn't make much sense to me, as it looks like it would shunt basically the whole AC signal to ground. it can't be right, not to mention that there is no cap there in the CSOD schem.

Divided By 13 - Joyride Overdrive [traced]