MV Shredhead

pedalcracker · Post by **pedalcracker** » 18 May 2010, 12:08

guts

JOHNO · Post by **JOHNO** » 18 May 2010, 12:30

Kind of looks like the "red fuzz" with an extra knob somewhere. Its got the same number of resistors. Got a couple more caps, maybe some power filtering. Got any pic of the trace side?

Greg · Post by **Greg** » 18 May 2010, 12:34

JOHNO wrote:Kind of looks like the "red fuzz" with an extra knob somewhere. Its got the same number of resistors. Got a couple more caps, maybe some power filtering. Got any pic of the trace side?

Red Fuzz is a simplified RAT and has a JFET output buffer.
No Transistor in there.

BTW - Look how close the wire on the centre pin of the footswitch is to shorting with the diagonal jumper below it.
Also the soldering on the Input Jack.

JOHNO · Post by **JOHNO** » 18 May 2010, 12:40

Yes you are correct i was just going buy whats in my head ,which isnt much at the moment. Too many beers.

Greg · Post by **Greg** » 18 May 2010, 12:43

JOHNO wrote:Yes you are correct i was just going buy whats in my head ,which isnt much at the moment. Too many beers.

No it's cool.. I hope someone figures out what it is..
It usually happens pretty quickly around here.
It's a simple enough circuit.

It does sound pretty good in the clips, but Burgs is a monster player too.

Sweetalk · Post by **Sweetalk** » 18 May 2010, 12:48

Crunchbox with presence knob outside?

Greg · Post by **Greg** » 18 May 2010, 13:14

Sweetalk wrote:Crunchbox with presence knob outside?

Yep.. I'd say so.
LM833 and about the right parts count and values.

mcaviel · Post by **mcaviel** » 18 May 2010, 13:59

Sweetalk wrote:Crunchbox with presence knob outside?

Damn, Just what i was thinking exactly!

Sweetalk · Post by **Sweetalk** » 18 May 2010, 14:36

mcaviel wrote:
Sweetalk wrote:Crunchbox with presence knob outside?
Damn, Just what i was thinking exactly!

I won I won!

.

How much does this costs?

mcaviel · Post by **mcaviel** » 18 May 2010, 15:41

Burgermans Demo Info wrote: As an introductory offer for a short time, Mark is letting the Shredhead go for a very reasonable US$99.00. The lead time from ordering is 1-2 weeks at the time of writing, although this clip may extend that period somewhat so you should be quick. Order via the contacts listed above.

paparoni · Post by **paparoni** » 19 May 2010, 04:20

@pedalcracker
who are you man?
u filipino?

g0d5_g1ft · Post by **g0d5_g1ft** » 19 May 2010, 04:40

paparoni wrote:@pedalcracker
who are you man?
u filipino?

roni di ba si MarkV yan?

english: paparoni, isn't that markV from the local music forum philmusic.com?

if he's selling this might as well give credit where it's due right? ie. madbean's cb v2.

I have this same exact layout from madbean, :d I know I built about 3 of these, first one's a bust so I made a cleaner pcb, thats two, then one pcb I made and prepopulated as an extra and gave to a friend...

quaternotetriplet · Post by **quaternotetriplet** » 19 May 2010, 04:42

g0d5_g1ft wrote:
paparoni wrote:@pedalcracker
who are you man?
u filipino?
roni di ba si MarkV yan?

english: paparoni, isn't that markV from the local music forum philmusic.com?

if he's selling this might as well give credit where it's due right? ie. madbean's cb v2.

shredhead..

no comment.

g0d5_g1ft · Post by **g0d5_g1ft** » 19 May 2010, 05:04

side by side...

can you spot the difference?

Greg · Post by **Greg** » 19 May 2010, 05:31

haha.. I think this one is solved.

RnFR · Post by **RnFR** » 19 May 2010, 05:35

alright, i just gotta say- this is some bullshit. that is not why madbean sells pcbs, and this is the type of shit that gives people reason to talk shit about this place. personally, i don't appreciate it at all.

g0d5_g1ft · Post by **g0d5_g1ft** » 19 May 2010, 05:59

to the guys defense, he did say it was "modded" and that the mods are underneath the PCB, what the mod is and how it fit there I do not know, I dont really care. I just saw this and I was curious

about the mod so I replied...

paparoni · Post by **paparoni** » 19 May 2010, 06:40

this is too disappointing man

Greg · Post by **Greg** » 19 May 2010, 06:50

g0d5_g1ft wrote:to the guys defense, he did say it was "modded" and that the mods are underneath the PCB, what the mod is and how it fit there I do not know, I dont really care. I just saw this and I was curious about the mod so I replied...

Then he should design his own PCB.. Madbean states very clearly that his designs aren't for commercial use.

Can't be much clearer than this:

"Circuits themselves are not copyrighted. Names, logos and artwork (including PCB layouts) can be trademarked and copyrighted.
The PCB's are intended for personal, non-commercial use. What this means is that there is an assumption that you are interested in DIY and building your own pedals and that the PCB's offered here can be utilized to create your own custom work. The PCB's are not intended, and should not be used, to build cheap knock-offs for mass production in an effort to undermine pedal manufacturers for personal profit. "

quaternotetriplet · Post by **quaternotetriplet** » 19 May 2010, 07:41

Greg_G wrote:
g0d5_g1ft wrote:to the guys defense, he did say it was "modded" and that the mods are underneath the PCB, what the mod is and how it fit there I do not know, I dont really care. I just saw this and I was curious about the mod so I replied...
Then he should design his own PCB.. Madbean says very clearly that his designs aren't for commercial use.